En8 Round Bar Supplier in Delhi NCR

Product Details:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements.

Product Details:

Carbon steel is available as bright drawn key steel in flat and square sections. With medium tensile strength key steel is used widely in general engineering for components such as plain, gibhead, taper and parallel keys. Key steel is produced to the required tolerances as specified in British Standard BS46

Product Details:

Carbon steels are iron-carbon alloys containing up to 2.06% of carbon, up to 1.65% of manganese, up to 0.5% of silicon and sulfur and phosphorus as impurities.

Carbon content in carbon steel determines its strength and ductility.

The higher carbon content, the higher steel strength and the lower its ductility.

According to the steels classification there are following groups of carbon steels:

• Low carbon steels (C < 0.25%)
• Medium carbon steels (C =0.25% to 0.55%)
• High carbon steels (C > 0.55%)
  • Tool carbon steels (C>0.8%)

Additional Information:

• Delivery Time: READY STOCK

Product Details:

EN8 carbon steel is a common medium carbon and medium tensile steel, with improved strength over mild steel, through-hardening medium carbon steel. EN8 carbon steel is also readily machinable in any condition.

EN8 steels are generally used in the as supplied untreated condition. But EN8 steels can be further surface-hardened by induction processes, producing components with enhanced wear resistance. Steel EN8 materials in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.

4.1 Carbon Steel EN8 Chemical Composition

4.2 EN8 Medium Carbon Steel Mechanical Properties and Hardness

 

Additional Information:

• Delivery Time: READY STOCK

Product Details:

EN 353 steel has carbon content material of 0.17 % & probably the most usual form of steel, because the carbon content material raises, the material becomes tougher & harder. It's observed that the hardness & wear resistance of the EN 353 steels elevated after the warmness therapy & the micro structure is exchange from ferrite to marten website.
This grade is in general used for a lot of automobiles functions comparable to heavy duty tools, shaft, pinion, cam shafts and gudgeon pins.

Steel Properties

En 353 steel has a carbon content of 0.17% and the commonest form of steel as it provides material properties that are acceptable for several automobile applications such as significant duty gear, shaft, pinion, camshafts and gudgeon pins. It’s neither outwardly brittle nor ductile due to its lower carbon content and lower hardness. Because the carbon content will increase, the metal becomes more durable and stronger.

Product Details:

EN8 carbon steel is a common medium carbon and medium tensile steel, with improved strength over mild steel, through-hardening medium carbon steel. EN8 carbon steel is also readily machinable in any condition.

EN8 steels are generally used in the as supplied untreated condition. But EN8 steels can be further surface-hardened by induction processes, producing components with enhanced wear resistance. Steel EN8 materials in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.

Good heat treatment results on sections larger than 65mm may still be achievable, but it should be noted that a fall-off in mechanical properties would be apparent approaching the centre of the bar. It is therefore recommended that larger sizes of EN8 steel materials are supplied in the untreated condition, and that any heat treatment is carried out after initial stock removal. This should achieve better mechanical properties towards the core.

Carbon Steel EN8 Chemical Composition

 

Product Details:

Features:

• Crank shafts, automobile axle beams, connecting rods, Lightly stressed gears
• Generally used for moderately stressed parts of Motor Vehicles and general engineering works

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Carbon steels are iron-carbon alloys containing up to 2.06% of carbon, up to 1.65% of manganese, up to 0.5% of silicon and sulfur and phosphorus as impurities.

Carbon content in carbon steel determines its strength and ductility.

The higher carbon content, the higher steel strength and the lower its ductility.

According to the steels classification there are following groups of carbon steels:

• Low carbon steels (C < 0.25%)
• Medium carbon steels (C =0.25% to 0.55%)
• High carbon steels (C > 0.55%)
  • Tool carbon steels (C>0.8%)

Product Details:

Alloy steels contain different varieties of steels that exceed the composition limits of Mn, C, Mo, Si, Ni, Va, and B set for carbon steels. They are designated by AISI four-digit numbers. They respond more quickly to mechanical and heat treatments than carbon steels.AISI 52100 alloy steel is known as a high carbon, chromium containing low alloy steel. The following datasheet gives an overview of AISI 52100 alloy steel.

Product Details:

EN8 carbon steel is a common medium carbon and medium tensile steel, with improved strength over mild steel, through-hardening medium carbon steel. EN8 carbon steel is also readily machinable in any condition.

EN8 steels are generally used in the as supplied untreated condition. But EN8 steels can be further surface-hardened by induction processes, producing components with enhanced wear resistance. Steel EN8 materials in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.

4.1 Carbon Steel EN8 Chemical Composition

4.2 EN8 Medium Carbon Steel Mechanical Properties and Hardness